SUPI LAUDESUOJA

PROTECTIVE OIL FOR SAUNA BENCH 

  

   

DESCRIPTION
Paraffin oil protection for wood surfaces against moisture and dirt.

RECOMMENDED USES
Untreated or previously oiled wooden sauna benches.

PRODUCT FEATURES
For untreated wood surfaces, e.g. sauna benches.

 

  

 

 

APPLICATION INSTRUCTIONS

 

Application conditions

The surface to be treated must be dry, the ambient temperature at least +5 °C and the relative humidity of air below 80%.

 

Surface preparation

Wash dirty benches with Supi Saunapesu cleaning agent according to instructions, rinse thoroughly and let dry. Sand if necessary and remove the sanding dust.

Application

Apply the sauna bench protection with a brush or clean cloth and allow the wood to absorb the oil. If the oil is absorbed immediately, repeat the treatment. Heat the sauna and wipe off the surplus oil with a clean cloth.

 

Cleaning of tools

Clean the tools with water and soap Clean tools with water. Clean tools with water and soap or Tikkurila Pensselipesu Tool Cleaner

 

Maintenance instructions

If needed, no earlier than in approx. 1 month from surface treatment: Clean the surface with Supi Saunapesu (mix 0.1–0.2 l of Saunapesu with 5 l of water). Undiluted Supi Saunapesu can be used on dirt stains. For bleaching the sauna benches, use a 1:1 solution of Supi Saunapesu cleaning agent and water, leave for approx. 15 minutes and rinse thoroughly. Repeat the Supi Laudesuoja treatment if necessary.

 

Environmental protection and waste disposal

Destroy liquid waste according to the local regulations for hazardous waste. Recycle empty, dry cans or dispose them of in accordance with local regulations.

  

 

TECHNICAL DATA

 

Colour Shades: Colorless, deepens the color of the wood.

 

Coverage: 8–15 m²/l, depending on the porosity of the surface.

 

Can sizes: 0.25 l, 1 l

Application method: Apply with a brush or clean cloth.

Drying time: Ready to use when the oil has been absorbed into the wood. The speed of absorption
depends on the porosity of the wood.

 

Density (kg/l): 0.8 kg/l, ISO 2811.

 

Volume solids (%): 100

 

Storage: Protect from frost